7-4
Description
Use the
display ip host
command to display the host names and corresponding IPv4 addresses in the
static domain name resolution table.
Examples
# Display the host names and corresponding IPv4 addresses in the static domain name resolution
table.
<Sysname> display ip host
Host
Age
Flags
Address
My
0
static
1.1.1.1
Aa
0
static
2.2.2.4
Table 7-4 display ip host
command output description
Field
Description
Host Host
name
Age
Time to live. 0 means that the static mapping will never age out.
You can only manually remove the mappings between host names and IP addresses.
Flags
Indicates the mapping type, static or dynamic.
Static represents static domain name resolution.
Address
Host IP address
dns domain
Syntax
dns domain domain-name
undo dns domain
[
domain-name
]
View
System view
Default Level
2: System level
Parameters
domain-name
: Domain name suffix, consisting of character strings separated by a dot (for example,
aabbcc.com). Each separated string contains no more than 63 characters. A domain name suffix may
include case-insensitive letters, digits, hyphens (-), underscores (_), and dots (.), with a total length of
238 characters.
Description
Use the
dns domain
command to configure a domain name suffix. The system can automatically add
the suffix to part of the domain name you entered for resolution.
Use the
undo dns domain
command to delete a domain name suffix (with a domain name suffix
specified) or all domain name suffixes (with no domain name suffix specified).
No domain name suffix is configured by default, that is, only the provided domain name is resolved.
Note that:
