12-9
Parameters
ipv6-address
: IPv6 address whose PMTU information is to be displayed.
all
: Displays all PMTU information.
dynamic
: Displays all dynamic PMTU information.
static
: Displays all static PMTU information.
Description
Use the
display ipv6 pathmtu
command to display the PMTU information of IPv6 addresses.
Examples
# Display all PMTU information.
<Sysname> display ipv6 pathmtu all
IPv6 Destination Address
ZoneID
PathMTU
Age
Type
fe80::12
0
1300
40
Dynamic
2222::3
0
1280
-
Static
Table 12-5 display ipv6 pathmtu
command output description
Field
Description
IPv6 Destination Address
Destination IPv6 address
ZoneID
ID of address zone, currently invalid
PathMTU
PMTU of an IPv6 address
Age
Time for a PMTU to live. For a static PMTU, a hyphen “-“ is displayed.
Type
Indicates the PMTU is dynamically negotiated or statically configured.
display ipv6 socket
Syntax
display ipv6 socket
[
socktype socket-type
]
[
task-id socket-id
]
View
Any view
Default Level
1: Monitor level
Parameters
socktype socket-type
: Displays the socket information of this type. The socket type is in the range of 1
to 3. The value “1” represents a TCP socket, “2” a UDP socket, and “3” a raw IP socket.
task-id
: Displays the socket information of the task. The task ID is in the range 1 to 150..
socket-id
: Displays the information of the socket. The socket ID is in the range 0 to 3072.
Description
Use the
display ipv6 socket
command to display socket information.
With no parameter specified, this command displays the information about all the sockets; with only the
socket type specified, the command displays the information about sockets of the specified type; with
