11
Before connecting the power supply, check that the power supply is steady. You can use a local power
source, uninterruptible power supply (UPS), or user-supplied power generator to supply power to the AP.
Ensure easy connection, secure operation, and convenient check and repair of the AP.
The AC-input voltage range is 100 VAC to 240 VAC, 50 or 60 Hz.
CAUTION:
•
Use a voltage stabilizer when necessary.
•
If uninterrupted communication is required, use a UPS power supply.
Check before power-on
Check the following items before you power on the AP:
•
The power supply is well grounded when the AP adopts local power supply.
•
The PoE power supply is well grounded when the AP adopts PoE power supply.
Local power supply
NOTE:
No power adapter and power cable are shipped with the AP.
Table 2
Power adapter specifications
Item Description
Input
100 VAC to 240 VAC
Output
+48V
at 0.52 A
The WA2610i-GN supports both AC and DC power adapters. You can connect the power port of the AP
to the power source through a power adapter to supply power to the AP.
Figure 13
Local power supply connection
(1) Power port
(2) Power adapter
(3) Power source