31
SNMP login example
Network requirements
Configure the AP and network management station so you can remotely manage the AP through
SNMPv3.
Figure 13
Network diagram
Configuration procedure
1.
Configure the AP:
# Assign an IP address to the AP. Make sure the AP and the NMS can reach each other. (Details
not shown.)
# Enter system view.
<Sysname> system-view
# Enable the SNMP agent.
[Sysname] snmp-agent
# Configure an SNMP group.
[Sysname] snmp-agent group v3 managev3group read-view test write-view test
# Add a user to the SNMP group.
[Sysname] snmp-agent usm-user v3 managev3user managev3group
2.
Configure the NMS:
Make sure the NMS has the same SNMP settings (including the username) as the AP. If not, the AP
cannot be discovered or managed by the NMS.
3.
Use the network management station to discover, query, and configure the AP. For more
information, see the NMS manual.