13
Prerequisites
Make sure the local power source or PSE is reliably grounded.
Connecting the PoE power supply
Use an Ethernet cable to connect port GE1/PoE+ on the AP to a port on a switch that supports PoE.
Figure 22 Connecting the PoE power supply
Connecting a power adapter
Use a power adapter to connect the AP to a local AC/DC power source.
NOTE:
The AP does not come with a power adapter. Purchase one as needed.
Figure 23 Connecting the AP to a local power source by using a power adapter
Table 2 Power adapter specifications
Item Specifications
Input
100 to 240 VAC