5
•
Few obstacles such as wall and ceiling exist between AP and clients.
•
The AP is far away from electronic devices (such as microwave oven) that may generate radio
frequency (RF) noise.
•
The AP does not hinder people’s daily work and life.
•
The place is not water seeping, water soaking, and condensing.
•
A lightning arrester (user supplied) is installed on the AP for cabling outdoors.
•
The AP must be over 5-meter away from 3G and 4G stations and antennas.
Installing the AP
Mounting the AP on a wall
1.
Align the screw hole in the AP bracket with the screw hole in the AP rear. Use the M4 × 10
screw to secure the AP bracket to the AP.
Figure 3 Attaching the AP bracket to the AP rear
2.
Mark the installation holes on the wall by using the mounting bracket, as shown in
.
Figure 4 Mounting holes in the mounting bracket