1
Appendix LEDs and ports
LEDs
Figure 1 LEDs on the AP
Table 1 LED description
Power LED
2.5-GE port
LED
GE port LED
WLAN LED
Description
Off Off Off
Off
No power supply is connected to the
AP.
Orange Off
Off
Off
A power supply has been connected
to the AP.
If the power LED remains orange
after a few minutes, an initialization
exception has occurred to the AP.
Flashing
green (0.5 Hz)
Off
Off
Off
The AP is booting.
Flashing
green (1 Hz)
Off Off Off
The AP is requesting IP addresses
or is creating a VLAN list.
Flashing green in turn
Off
The AP has obtained IP addresses
and is attempting to discover an AC.
Steady green
Flashing green in turn
Off
The AP has discovered an AC and is
attempting to register on the AC.
Steady green
Off
N/A
N/A
No link or traffic is present on the 2.5
GE port.
Steady green
Flashing green
(1 Hz)
N/A N/A
The 2.5 GE port is sending or
receiving data at 2.5 Gbps.
Steady green
Steady green
N/A
N/A
The 2.5 GE port is sending or
receiving data at 1000 Mbps.
Steady green
Steady orange
N/A
N/A
The 2.5 GE port is sending or
receiving data at 10 or 100 Mbps.
Steady green
N/A
Off
N/A
No link is present on the GE port.
Steady green
N/A
Steady green
N/A
The GE port is sending or receiving
data at 1000 Mbps.
Steady green
N/A
Steady orange
N/A
The GE port is sending or receiving
data at 10 or 100 Mbps.
