2-7
IMPORTANT:
Radio 1 operates in the 5 GHz band. Radio 2 can operate in either 2.4 GHz or 5 GHz band.
An RF cable is used to connect an antenna port to an external antenna.
To connect an RF cable:
1.
Remove the weatherproof cap from the antenna port on the AP.
2.
Connect a lightning arrester to the antenna port.
3.
Connect the RF cable to the lightning arrester.
Figure2-10 Connecting an RF cable
4.
Install a load for each unused antenna port.
Figure2-11 Installing a load for an antenna port