4
© HAAG-STREIT AG, 3098 Koeniz, Switzerland - HS-Doc. No. 1500.7200492-04150 – 15. Edition / 2017 – 01
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
SVENSKA
1. Safety
DANGER!
Failure to comply with these instructions may result in material damage
or pose a danger to patients or users.
WARNING!
These warnings must absolutely be complied with to guarantee
safe operation of the device and to avoid any danger to users and
to patients.
NOTE!
Important information: please read carefully.
1.1 Areas of application of the device
The device is intended to use in professional health care facility environment, like
doctor's practices, hospitals and optometrists and opticians premises, except near
of HF surgical equipment and in RF shielded rooms of ME-systems for magnet-
ic resonance imaging. Some portable radio frequency equipment, like cell phones
or RF telephone equipment including antennas may interference medical devices.
Such equipment has to be kept in a distance of more than 30 cm (12 inches) from
any part of the instrument. Inobservance of this precaution may lower the correct
function of the instrument.
1.2 Ambient conditions
Transport:
Temperature
Air pressure
Relative humidity
from
from
from
−40°C
500 hPa
10%
to
to
to
+70°C
1060 hPa
95%
Storage:
Temperature
Air pressure
Relative humidity
from
from
from
−10°C
700 hPa
10%
to
to
to
+55°C
1060 hPa
95%
Use:
Temperature
Air pressure
Relative humidity
from
from
from
+10°C
800 hPa
30%
to
to
to
+35°C
1060 hPa
90%
1.3 Shipment and unpacking
•
Before you unpack the appliance, check whether the packaging shows traces of
incorrect handling or damage. If this is the case, notify the transport company that
has delivered the goods to you. Unpack the equipment together with a represen-
tative of the transport company. Make a report of any damaged parts. This report
must be signed by you and by the representative of the transport company.
•
Leave the device in the packaging for a few hours before unpacking it (conden-
sation).
•
Check the appliance for damage after it is unpacked. Return defective applianc-
es in the appropriate packaging.
•
Store packaging material carefully so that it can be used for potential returns or
when moving.
•
The slit lamp and head rest must be installed on an electrically insulated, fire
-
proof table top.
•
The rail covers (a) prevent the slit lamp from tilting.
•
Are the connection parts of the accessories in the correct position (screw con-
nections, quick-release fasteners)?
(a)
1.4 Installation warnings
WARNING!
•
Do not modify this equipment without authorization of the manufacturer.
Installation and repairs may only be performed by trained specialists.
Any third-party device must be connected in compliance with the
EN 60601-1 standard.
Only original HS replacement parts may be used.
The device must not be stacked or placed in close proximity to other
electronic devices.
•
•
•
1.5 Operation, environment
DANGER!
Never use the device in potentially explosive environments where vola-
tile solvents (alcohol, petrol, etc.) and flammable anaesthetics are in
use.
WARNING!
The device must be switched off after every use. Otherwise there is a
risk of overheating when a protective dust cover is used.
01_IFU_BM900-7200492-04150_eng.indd 4
21.02.2017 09:54:53
