!
!
!
!
!
!
!
!
!
Safety Notes
5
4.
Safety Notes
These notes are intended to draw your attention to risks
which only YOU can recognize and avoid or overcome. They
are intended to enhance your own safety consciousness.
We have set the highest quality standards for ourselves and
this unit during development and production. Every unit
meets relevant safety regulations. The correct unit usage
and proper handling is however solely your responsibility.
The intended workplace should correspond to a laboratory
or pilot plant environment. The user should have an educa-
tion level which is at least equivalent to a trained laboratory
worker or specialized chemist. The following list should be
seen as an example.
The device may not be operated if there are any doubts
regarding a safe operation due to the outer appearance
(e.g. damages).
A safe operation of the instrument cannot be guaran-
teed if the user does not comply with this instruction
manual.
Ensure that this manual is always at hand for every unit
operator.
Only use this unit solely for the intended application.
Repairs, alterations or modifications must only be car-
ried out by specialist personnel. Considerable damage
can be caused by improper repairs. The HAAKE service
department is at your disposal for repair work.
Do not operate the unit with wet or oily hands.
Do not clean the unit with solvents (fire risk!) – a wet
cloth soaked in household detergent is normally suffi-
cient.
This device is not designed according to the standard
EN 60601-1: 1990 (DIN VDE 0750-1 and IEC 601-1) and
should not be operated in rooms used for medical pur-
poses and/or in the vicinity of patients.
Only use heat transfer liquids recommended by HAAKE.
Please refer to the respective EC – Safety Data Sheet.
