Haan duo HD-50, User Manual

  operating Instructions:

 (cont)

Using your Duo

™ 

Steam Sweeper & floor Sanitizer

SWEEPER FUNCTION ON CARPET AND SOFT  

     SURFACES:

The 

HaaN

®

 Duo

™

 can move onto carpeted surfaces  

easily. The SWEEPER function picks up dirt, while the  

STEAM function freshens carpets and soft surfaces,  

killing up to 99.9% of germs, bacteria and dust mites,  

without chemicals. To use the Duo

™

 on rugs and carpet,  

you MUST remove the Pad Tray.

 The Ultra-Microfiber 

Pad is 

NOT

 used on the Duo

™

 when using on rugs and  

carpet, unless you are spot treating (see pg 13 for details).

     To use the Sweeper function alone:
 

1)   Before using the unit on carpet, remove the Pad Tray.   

Place your foot on the rear tab of the Pad Tray (it 

extends out on the right) (Fig 15). While holding the 

tray down with your foot, pull up on the pole of the 

Duo™ until the tray snaps off.

2)  Plug the Duo

™

 cord into a grounded electrical outlet.

3)  Press the “SWEEPER” button on top of the Duo

™

 to  

start the Sweeper function (Fig 16).

4)  Gently press the top of the unit and tip back the  

handle to a comfortable sweeping position. We  

recommend a 45˚ angle (Fig 17).

5)  Slowly glide the Duo

™

 back and forth across the  

floor  to pick up loose dirt and particles (Fig 18).

To use the Sweeper and Sanitizer simultaneously:

1)  With the unit on the Floor Protector Resting Mat  

(‘bumpy’ side up), add water to the tank as described  

in step 2 of the ‘To Refill Water Tank’ instructions  

on pg 11. 

Do not overfill

.

2)  Plug the Duo

™ 

Steam Sweeper & Floor Sanitizer into  

a standard 120-volt grounded wall receptacle.

3)   Press the GREY STEAM oN/oFF power button to  

turn on the STEAM Function. The STEAM power   

indicator light on top of the unit will illuminate  

RED. Your Steam Sweeper and Floor Sanitizer  

is heated and ready to use when the Thermal  

Indicator on the tank cap changes from BLACK  

to oRANGE (Fig 19).

3)  once the unit is heated and ready to use, press  

the “SWEEPER” button to activate the Power-Lift 

Brush (Fig 16). Place the unit on the carpet; 

Fig 16

Fig 17

Fig 15

Fig 18

Fig  19

Rear Foot Tab

Sweeper

Button

Power Light

STEAM 

Button

Thermal 

Indicator

pg 12                   877-HAAN DIRECT / 877-422-6347 

www.

HAAN

USA.com

HeLpfUL 

HAAN

®

 HINt:  

If you are NOT using the steam 
function, it is not necessary to 
place the unit on the Floor  
Protector Resting Mat.