2.470in
62.75mm
3.250in
82.55mm
(2x)
10.9375in
277.81mm
(2x)
.750in
19.05mm
2.063in
52.39mm
4.813in
122.24mm
6.125in
155.58mm
6.8in
171mm
Main Spindle Tailstock
Spindle CL
Bolt hole pattern
for Steadyrest
Base
(4x) 3/4-10 UNC
1.0in [25mm]
Note - Phantom holes cannot
be used for steadyrest mounting
13.75in
349.3mm
Minimum distance
Spindle face to
front of steady
rest base
9.2in
234mm
Minimum distance
to standard chuck face
(Approximate/Varies)
20.6in
523mm
7.6in
194mm
Minimum
12.1in
307mm
B
B
13.147in
334mm
Top of Plate
to spindle CL
20.0in
508mm
SECTION B-B
First
interference is
rear door lip
All dimensions based on stackup of sheetmetal, subject to variation of 1/2" ( 13 mm)
Due to continual product improvements, machine dimensions are subject to change without notice
View looking at Main Spindle
Tailstock at maximum forward travel with Steadyrest option
Steadyrest Base Plate Diagram
Spindle CL and Swing
Steady Rest
Machine Layout Drawing
Page 8 of 10
ST-30L 30LY 35L 35LY
