3
Important:
After this, adjust the fireplace in horizontal position using the water level.
4. It is now necessary to secure the flue pipe connection (for instance with double wall lining) in the
fireplace (see installation and operating instructions of the fireplace).
5.
Start with the installation of the kit.
6 NOTE
It is not permissible to assemble the kit without bonding the elements together and without securing
the fireplace hood against sliding!
To avoid minor cracks in the wall we recommend filling these with acrylic compound (acrylic
compound can be immediately painted over unlike silicon).
Once the fireplace kit has dried the fireplace can be painted (use mineral-base paint, no depth
primer required). To obtain a fine-grain structure, simply mix some adhesive into the paint for the
first coat. Use only paint for the second coat. Of course you can also use roll-on or rubbing plaster to
finish the surface.
Allow the fireplace kit to dry at least 2 weeks before initial use.
To start the fireplace: Carefully read the operating instructions and start the oven using little wood.
Heating at rated output can then commence after approximately one hour.
