Failures and failures:
Workaround:
6. Exhaust gases exit:
a
.) The delivery pressure is too weak
b.) Structural conditions such as for
example (too) tight windows and doors,
such as exhaust gas emission when
opening oven door
c.) Stove hood is switched on
a.) Contact
chimney sweeper
b.) External air supply
c.) Ensure adequate air supply
7. Cinder builds up:
a.) Overloading the oven by heating
with open door
b.) Non-combustible components in the
fuel.
8. Deflagration:
a.) Temporary build up or backflow
in the chimney
b.) Sooty air tractions and exhaust
pipes
a.) Close oven door
b.) Select appropriate fuels
a.) Adjust knob position correctly
c.) Clean air tractions and exhaust
pipes
For cleaning and maintenance of stainless steel parts, use only the
special products available in the shops
.
Under no circumstances should
abrasive or scratchy aids and equipments be used!
Please consider that visiting our customer service during the warranty
period will not be free of charge if the device is not working properly
due to improper use.
Subject to technical change!
20
