General information
Dear Customer!
Before starting up please read these instructions carefully. Then you get
familiar with operating the stove very quickly.
A solid fuel stove is not a
toy...
The stove is hot during operation!
Therefore children should be implicitly kept away, as they do not recognize the
risks which can occur when handling stoves. Our equipment complies with the
safety regulations of the law on technical work equipment. However, this does not
cover in any case all accident risks whatsoever.
Questions:
In case of questions and complaints please provide the full details and serial
number of the model. This information is printed on the label.
The label is located
on the left front support leg and also on the back of this manual.
To ensure safe operation of your device, be sure to follow the safety instructions
in the appropriate chapter.
By heating micro cracks in fireclay may arise, but these have no effect on
the operation.
In case any problem occured due to poor air draught conditions
during the heating up phase, here are some tips:
Please use smaller (2 to 4 cm) pieces of wood when starting the fire.
We recommend you to use firelighter cubes comercially available
(Pay attention
to environmental compatibility).
To start the fire, fully open the air combustion control.
Also at the first pile up, please use not too large and not too many pieces of
wood. Clean the device every time before use.
Disposal of packaging
Packaging and packaging aids,
except for wood-based materials, are
recyclable, so dispose them at the
proper container.
Paper, paperboard and corrugated
board should be placed in the proper
collection containers. Plastic
packaging parts should also be given
to the relevant collector.
3
At packaging aid only recyclable
plastics are used, see here:
PE = polyethylene
02 = PE-HD
04 = PE-LD
PP=polypropylene
PS = polystyrene
