4
Artificial stone kit - PLANAI
– Parts list
Article No.
No. Quantity Designation
Type
Material
0717542040100
1
1
Base plate right
Artificial stone Artificial stone
0717542040200
2
1
Base plate left
Artificial stone Artificial stone
0717542040300
3
1
Base element right
Artificial stone Artificial stone
0717542040400
4
1
Base element left
Artificial stone Artificial stone
0717542040500
5
1
Base blind front
Artificial stone Artificial stone
0717542040600
6
1
Base blind rear
Artificial stone Artificial stone
0717542040700
7
1
Lateral cover
Artificial stone Artificial stone
0717542040800
8
1
Lateral cover console
Artificial stone Artificial stone
0717542040900
9
8
Screw M 10x150 mm
steel
steel
0717552050100
10
2
Cover plate 612x214 mm
black
granite
0717552050300
12
4
Decorative plate 60x60 mm
black
granite
0717552050400
13
2
Plate 415x128 mm
black
granite
0717552040100
10
1
Cover plate ri.612x214 mm
terra
Artificial stone
0717552040200
11
1
Cover plate le.612x214 mm
terra
Artificial stone
0717552040300
12
4
Decorative plate 60x60 mm
terra
Artificial stone
0717552040400
13
2
Plate 415x128 mm
terra
Artificial stone
0621800105000
14
1
Adhesive
0621800105050
15
1
Acryl
Assembly instructions artificial stone kit PLANAI
Note:
Ensure that the insert is accurately positioned prior to the assembly. Always ensure that the
parts are assembled horizontally and plumb.
1. Assemble the fireplace kit in the dry condition. Check to see whether the elements are plumb
and level. Mark the correct position using the pencil.( figure 3-7)
After this, remove all elements and assemble one by one using the tile adhesive.(figure 3-8)
2. Mix the supplied adhesive (safety adhesive) with water until a consistency similar to toothpaste
is obtained. Bond all elements together and to the wall. The bonding surface should be clean
and slightly moistened to achieve optimum adhesive strength. Remove excess adhesive with
the spatula and a moist cloth.
3. Once the kit has been finish painted, finally glue the plates to the bases.
