GB
17
9.1.4. Heating curve
Heating curve
Procedure:
Press and move the scroll bar to select the setpoint value and then
press the
"OK"
button to conform it.
Setting range of the heating curve from
1
to
4
. Factory setting:
2
The value to be set is based on the size of the room being heated.
2
0
4
OK
• Room size 20 m² -
Wert 1
• Room size 25 m² -
Wert 2
• Room size 30 m² -
Wert 3
• Room bigger than 30 m² -
Wert 4
9.1.5. ECO Mode
Procedure:
To activate ECO Mode, resize the button.
Oper. mode
Automatic
Heating curve
2
ECO Mode
Maintenance
1000 kg
9.1.6. Maintenance
Maintenance
The service interval can only be reset after burning more than
1 kg
of pellets
After that, the
maintenance interval
.
Maintenance due after 830 kg
Maintenance
Procedure:
By pressing the
"RESET"
button, you will be asked whether you
really want to reset the service interval.
By pressing the
"OK"
button, the service interval again will be reset
to 1000 kg and an error code W0042 will be logged into thee Error
Log.
Maintenance work
See operating instructions
RESET
