GB
5
5.1. Minimum gaps to flammable components
CAUTION
When installing the stove, it is essential to observe the official fire protection regulations. Please observe the
national regulations to this effect.
WARNING
As the minimum distances from flammable or temperature-sensitive materials (E. G. furniture, wallpaper,
wooden cladding) and from load-bearing walls, the specified gaps "at the back", "on the sides" and in the
"direction of radiation forwards" must be maintained
according to the nameplate
.
WARNING
Floor protection:
In case of flammable or temperature-sensitive floor coverings, the appliance must be placed on a non-
flammable base (see drawing).
Figure 2: Recommendation for floor protection:
A
30 cm – at the front
B
10 cm – at the sides
C
up to the back wall
WARNING
It is forbidden to put down or to install things which are not fireproof upon the stove or in its vicinity!
5.2. Combustion air supply
Note
It must be ensured that there is sufficient fresh air at the place of installation.
Summary of Contents for HSP 4.0-F2
