Operating instructions 3745
Appendix
Checklist preventive maintenance
Flexproof-Cutter AF-603
Page 18 of
20
Edition: 01/0512
Subject to alterations
Responsible persons:
A: Machine
Operator
B:
Maintenance
Technician
Work to be carried out
Performance
Spares
number
(see operating instructions No. 3745 for further information and reference numbers)
periodically (monthly)
Evaluation criterion
Daily
1
6
Remarks
1. Cleaning
1.1
Clean the Flexproof-cutter after use, remove residual matter
A
1.2 Compressed air filter: drain condensate, clean filter. If necessary replace.
A
2. Lubrication
2.1
Lubricate threaded spindle with ball bearing grease
B
2.2
Lubricate indexing gears with ball bearing grease
B
3. Wear
parts
3.1
Check the cutting pad (17) for wear. If necessary turn on other side or replace it.
A
3.2
Check cutting blades (21) in the die-cutting head for wear. If necessary replace them.
See operating instructions 3745, Section 5.3
A
4. Checking
4.1
Check pneumatic system for leaks. If necessary eliminate them.
B
Remarks and notes: