Habasit AG
Postfach, CH-4153 Reinach-Basel
Phone
++41 61 715 15 15
Fax
++41 61 715 15 55
Operating Instructions
36009
Author: Nyk/Ni/AA
Page 1 of
14
Edition: 03/0404
Subject to alterations
Replaces: Edition
02/9912
Welding Device PQ-18
The PQ-18 is a simple and cost effective tool for welding of Polycord round
belts. The joining operation is by blunt welding: Ends of the belt are melted by
pressing them against the surface of a precisely regulated hot welding plate.
After sufficient heating belt ends are pressed against each other with a
defined pressure and left to cool in a defined position. After removing the
resulting bead with a knife or by grinding an optimum quality round belt is
ready for use.
The PQ-18 is well suitable for on-site installation and small to medium size
series fabrication in the workshop.
