Operating instructions 36008
Hot-pressing device
PT-50
Page 4 of
16
Edition: 01/0409
Subject to alterations
1.3
Scope of supply
Qty. Item
1
PT-50 hot-pressing device packed in a cardboard box
1 Operating
instructions
1.3.1 Available accessories
Also refer to chapter 9.
•
Skiving tool AT-60 (690050)
•
Skiving tool AT-200 (690160)
•
Temperature measuring device (N-28714 or N-28715) for checking the pressing temperature
1.4
Ordering of accessories / spare parts
Spare parts and accessories can be ordered directly from the manufacturer.
Address:
Habasit Italiana S.p.A.
Via A. Meucci 8, Zona Industriale
I-31029 Vittorio Veneto/TV
Tel. ++39 438 91 13
Fax ++39 438 91 2374
Please accurately describe the parts required.
State the numbers according to Section 8.1, Drawings – Assembly of press.
WARNING
The use of parts by other manufacturers not meeting Habasit specifications is not
admissible.
Habasit declines all responsibility for the consequences if non-Habasit parts are
used.
1.5 Warranty
All tools undergo a strict final inspection. On the assumption of correct handling, they are warranted against
material and manufacturing defects for 1 year.
1.6 Technical
advice
Our specialists will be pleased to advise you. For technical questions concerning function and condition of
the hot-pressing device, please contact the manufacturer (see Chapter 1.4 for the address).
