Habey BIS-6564 Quick Setup Manual Download

Page: 3 / 4

www.habeyusa.com

Then mount the HDD bracket back onto the

backplane and fix it.

Your system is now ready. Connect the power cable to a power source and

press the power button on the front of the system.

Step 6 - Hardware Installation Complete

Place the cover as illustrated in the picture

and connect SATA cable to HDD marked in

lines.

Locate the included rack mount brackets

(ears). Mount the ears on the bottom cover

by securing the ears to the side of the

enclosure with the included screws.

Step 5 - Rack Mounting

Summary of Contents for BIS-6564

Page 1: ...Mounting Bracket 1 Rack Mount Ears 2 Rack Mount Screws 4 Drive Mounting Screws 4 Packing List Safety Warning The use and installation of this system should only be performed by professionals Improper installation of any electronic device or electrical component can result in serious injury or death Please make sure that all safety precautions are taken into account ...

Page 3: ...ce and press the power button on the front of the system Step 6 Hardware Installation Complete Place the cover as illustrated in the picture and connect SATA cable to HDD marked in lines Locate the included rack mount brackets ears Mount the ears on the bottom cover by securing the ears to the side of the enclosure with the included screws Step 5 Rack Mounting ...

Page 4: ...ons 21015 Commerce Pointe Drive Walnut CA 91789 www habeyusa com Copyright 2014 Habey USA All Rights Reserved Version 1 224mm 9 6 156mm 6 1 54mm 2 1 Rear Panel COM 2x USB2 0 Audio LAN VGA HDMI Power S PDIF 1x USB2 0 2x ANT ...