2.2 Populating Memory Modules
1. Install the desired number of SO-DIMM into the memory slots. Pay attention to the notch along the
bottom of the module to prevent incorrect DIMM module installation.
2.Insert SO-DIMM module at the proper angle and snap it into place.
Figure 2: Memory Card Installation
2.3 Installing a SO-DIMM Memory Card.
Locate the memory slot. Ensure memory is a 204-Pin SO DIMM. Align notch in memory circuit with
corresponding guide on the memory slot. Insert the memory circuit at a 45° angle and press the circuit flat
and secure it to the memory slot with an audible click on each side of the memory slot.
3. Motherboard Installation
The ITX-6771 motherboard has standard mini-ITX mounting holes to fit different types of chassis. Make
sure that the locations of all the mounting holes for both motherboard and chassis match. Although a
chassis may have both plastic and metal mounting fasteners, metal ones are highly recommended
because they ground the motherboard to the chassis. Make sure that the metal standoffs click in or are
screwed in tightly. Then use a screwdriver to secure the motherboard onto the motherboard tray.
