background image

14.

From the inside of the Ladder Handle, insert the two Machine Screws through the Flat Washers, then

through the Ladder Handle and fasten in place using the two Lock Washers and Cap Nuts. (See 

Fig. 6

).

15.

Place the Ladder Base Plate under the plain ladder legs as shown in 

Figure 6

.

16.

From the top of the Plain Ladder Legs, insert he two Machine Screws through the Flat Washers then

through the Ladder Base Plate and fasten in place using the Hex Nuts (

Figure 6

).

17.

Place the Swivel Leg Assembly over the Ladder Hinge and clip on the plain ladder legs with the swivel

ladder clamp button and the swivel ladder clamp as shown in 

Figure 6

. Insert one plastic flat washers into

each recess between the ladder hinge and the straight ladder leg.

18.

From the inside of the Ladder Hinge, insert the Machine Screws through the Plastic Flat Washer, then

through the Straight Ladder Leg and fasten in place using the Lock Washers and Cap Nut (See 

Fig. 6

).

19.

The Swivel Ladder Ass’y should be put outside the pool. Make sure the Ladder Latches are clipped on

the Ladder Clamps is in use. (See 

Fig. 7

).

20.

When the ladder is not in use, swing up the Swivel Ladder Assembly until the Swivel Ladder Clamps are

clipped on the Ladder Handle and hear with a ‘click’ sound. (See 

Fig.8

).

21.

To use the ladder, press the button of the Swivel Ladder Clamp with Button, and swing the ladder to the

use position as shown in the 

Figure 7

.

-

N

O

TE

 -

THIS STEP IS VERY IMPORTANT BECAUSE IT KEEPS THE HANDLES FROM SEPARATING FROM THE 

LEGS. LADDER FAILURE WILL RESULT IF SCREWS ARE NOT PROPERLY INSTALLED!

-

16

 

-

Summary of Contents for 91 cm
































Reviews: