R.
STOP: when the motor is running, press it to stop the motor.
S.
SPEED +: in setting sate, press it to increase the set value. When the motor is running, press it to
increase the speed.
T.
SPEED -: in setting sate, press it to decrease the set value. When the motor is running, press it to
decrease the speed.
U.
I: in setting sate, press it to increase the set value. When the motor is running, press it to
increase the incline.
V.
INCLINE -: in setting sate, press it to decrease the set value. When the motor is running, press it to
decrease the incline.
W.
When the safety
lock is removed, press MODE for 3s to for metric –inch conversion.
II Instructions to fixed program/ startup
3.
Program:
D.
One manual mode, including normal mode, time countdown, calorie countdown and distance
countdown modes.
E.
12
fixed programs: P01, P02… P12.
F.
3 customized programs: U01, U02 and U03.
4.
Startup
C.
Past the safety lock to the safety lock switch position on the panel.
D.
Press “START” and the window will display 3—2—1; for each time of number reduction, the buzzer
will sound. Then, the motor will be started.
III Manual mode:
3.
How to enter manual mode:
C.
Switch on the power supply; then, directly enter normal mode under the manual mode.
D.
In stop state, press MODE to select normal mode under the manual mode
4.
Three setting functions under manual mode: time setting, distance setting and calorie setting.
E.
When entering the manual mode, the time is displayed as 0:00;
F.
In manual mode, press MODE to enter time countdown mode; the time window will display the time
and flicker; the initial time is 30:00; set countdown time by SPEED +/ SPEED - and I/
INCLINE -. Time setting range: 5:00-99:00.
G.
In time countdown mode, press MODE to enter distance countdown mode; the initial distance will be
displayed as 1.00
km/mi; set the distance by SPEED +/ SPEED - and I/ INCLINE - in the
range of 0.50-99.90
km/mi; each time of increase/ decrease will be 0.1 km/mi.
H.
In distance countdown mode, press MODE to enter calorie countdown mode; the initial distance will
be displayed as 50.0kcal; set the calorie by SPEED +/ SPEED - and I/ INCLINE - in the
range of 10.0-999.0 kcal; each time of increase/ decrease will be 1.0kcal.
5.
Operation in manual mode:
J.
Press START and the motor will start operating after 3s of countdown; the initial speed will be
1.0km/h for metric system or 0.6mile/h for imperial system;
K.
Press SPEED +/ SPEED - to adjust speed;
L.
Press I/ INCLINE - to adjust the incline;
M.
Press speed shortcuts to quickly set up to the speed marked on the key;
N.
Press incline shortcuts to quickly set up to the incline marked on the key;
O.
When the motor is running, press STOP to stop the motor;
P.
Remove the safety lock to urgently stop motor running; then, LCD window will display “---” and the
buzzer will make short sound of Bi-Bi-Bi.
Q.
When the set time reduces to zero or when the set calorie reduces to zero, or the set distance reduces
31
Summary of Contents for JAMES 1332 83774
Page 1: ...JAMES 1332_83774...
Page 3: ...2...
