2019
35
2020-2021
IMPORTANT:
Because of the combined weight of the spa, water, and users, it is extremely important that
the base where the spa is installed is smooth, flat, level and capable of uniformly supporting
this weight for the entire time the spa is installed. If the spa is placed on a surface, which
does not meet these requirements, any damage caused by improper support will void the
warranty. It is the responsibility of the spa owner to assure the integrity of the site at all
times.
a)
Indoors installation:
Be aware of special requirements if you install the spa indoors.
1.
The floor must be able to withstand the capacity of the spa. The floor should be a non-slip,
level surface.
2.
Proper drainage is essential for indoor spa installation. When building a new room for the
spa it is recommended that a floor drain be installed.
3.
Humidity is a natural side effect of spa installation. Determine the effects of airborne
moisture on exposed wood, paper, etc. in the proposed location. To minimize these
effects it is best to provide plenty of ventilation to the selected area. An architect can
help determine if more ventilation is needed.
NOTE:
Do not install the spa on carpet or other material that can be damaged by moisture.
b)
Outdoors installation:
1.
No matter where you install the spa, it is important you have a solid support foundation.
If you are installing the spa outdoors, ensure there are no sharp objects that could
damage it and that the location is level so the spa sits stably and properly.
2.
During filling, emptying or when in use, water may spill out of the spa. The spa should be
installed near a ground drain.
3.
Do not leave the spa’s surface exposed to direct sunlight for long periods of time.
Summary of Contents for Monaco 4 places
Page 3: ...2019 3 2020 2021...
Page 4: ...2019 4 2020 2021...
Page 28: ...2019 28 2020 2021...
Page 29: ...2019 29 2020 2021...
