hoverboard, it will automatically lock after a short period to avoid unintentional
starting. Unlock the hoverboard again to continue using it.
Charging
Find the charging port in the bottom.
Ensure the power socket and charging port is
dry.
Open the cover of the charging port.
Insert input power of the charger into the power socket(AC100V-240V).
If the charger indicator is red, it indicates that the battery is being charged;
If it turns to green, it indicates that the battery is fully charged.
Please unplug the charger after the product is fully charged.
Please charging the battery in a dry and ventilated environment.
Built-in safety functions
If the hoverboard registers a fault or failure, a built-in safety program will intervene.
This may happen in the following circumstances:
If the hoverboard leans forward or backward more than 10 degrees or if it tilts for
more than 30 seconds, an alarm will light up and sound.
If the hoverboard leans forward or backward more than 35 degrees, the hoverboard
will be automatically switched off.
If a wheel is blocked for 2 seconds, the hoverboard will be automatically switched
off.
If the speed exceeds 10 km/h, an alarm will sound and the hoverboard will
automatically tilt towards the horizontal to decelerate.
If the speed accelerates intermittently, or if the hoverboard is used erratically, an
alarm will sound.
If the battery is about to run out of power, the hoverboard will enter self- protection
mode. Do not continue to use the hoverboard. Charge it fully to avoid damaging the
battery.
Calibration (reset)
Your hoverboard needs to be calibrated if you experience the following problems:
-Your hoverboard turn slightly to left or right when you ride straight ahead.
