4
Customer Helpline 0345 6400800
Installation
Installation
IMPORTANT !
-
Electrical connections
must be carried out by a suitably
qualified person and in accordance
with all relevant local building and
installation regulations. If in doubt
consult a qualified electrician.
Installation
1.
Place the support shade frame onto
the lamp holder section.
2.
Screw the shade ring onto the lamp
holder to secure support frame in
place.
3.
Screw the bulb (not supplied) into
the lamp holder, ensuring you do
not exceed maximum bulb size
Heigh:78mm , Diameter:45mm
suitable for this product and the
maximum wattage stated on the
product.
4.
Place the metal shade over the top
section of the support frame.
5.
Screw the decorative nut into the
support frame to secure shade in
placed
6.
Remove the pin plug cover and plug
into a normal household socket.
7.
Using the in
-
line switch, turn on and
test.
Replacement Lamp
Maximum wattage
-
See lamp holder
Light bulb shape
-
See lamp holder
On / Off
Switch
1
2
3
4
5
5
6