Figure 1 Call the server
1
Call initiation target
2
Magnet
Installation
W A R N I N G
Electromagnetic radiation hazard. To meet regulatory radio safety requirements for this modem, do not use or install the
device with an antenna that is not supplied by the manufacturer. Make sure that all antennas are kept at a minimum distance
of 20 cm (7.9 in.) from all personnel in normal use.
N O T I C E
Test the antenna and cell coverage at the site location before installation.
N O T I C E
Make sure that the flow meter is programmed to call the host PC before installation.
Blade antenna
N O T I C E
The blade antenna is intended for above-ground use.
1.
Unpack the antenna (
Figure 2
).
2.
Bend the antenna at the joint to a 90 degree angle between the antenna and the swivel fitting.
3.
Put the antenna extension inside of the logger handle (
Figure 3
).
4.
Align the threads from the antenna fitting to the antenna receptacle on the logger. Hand-tighten by turning the
swivel end.
Figure 2 Blade antenna
2
