Figure 9 Dilutor tubing connections
1
DI water
5
Tube to sampler probe
9
Solenoid valve port 1
2
Tube to solenoid valve
6
Sample tube from sample probe
10
Sample tube to pump and
injection valve
3
Diluent solution
7
Solenoid valve port 2
4
Tube to dilutor
8
Solenoid valve port 3
Install the heater mandrel
If the instrument has a heater module, a heater mandrel must be installed. To install a heater
mandrel:
1.
Make sure that the heater mandrel has the applicable wrapping.
2.
Remove the channel cover. Refer to
.
3.
Install the mandrel, the tubing and the thermocouple jack.
4.
Install the manifold board.
English
15
