Hach SC4200c, User Manual

Specifications

Specifications are subject to change without notice.

Specification

Details

Dimensions (W x H x D) ½ DIN—144 x 144 x 192 mm (5.7 x 5.7 x 7.6 in.)

Weight

1.7 kg (3.7 lb) (Controller weight without optional modules)

Enclosure

NEMA 4X/IP66 metal enclosure with a corrosion-resistant finish

Operating temperature

–20 to 60 °C (–4 to 140 °F); 

Cellular version

: –20 to 55 °C (–4 to 131 °F)

Storage temperature

–20 to 70 °C (–4 to 158 °F)

Relative humidity

0 to 95%, non-condensing

Altitude

2000 m (6562 ft) maximum

Installation category

II

Pollution degree

2 

Protection class

I, connected to protective earth

Power requirements

100–240 VAC ±10%, 50/60 Hz; 0.5 A (7 Watt sensor load)

Measurement

Two device digital SC connectors

Relays high voltage

Two relays (SPDT); 

Maximum switching voltage

: 250 VAC; 

Maximum switching

current

: 5 A (resistive only load); 

Maximum switching power

: 1250 VA, 125 W

(resistive only load); 

Wire gauge

: 0.75 to 2.5 mm

2

 (18 to 12 AWG)

Outputs (optional)

Five 4–20 mA analog outputs on each analog output module

1

Analog input (0–20 mA or 4–20 mA) on each analog input module

Digital communication

Profibus DPV1 card

1

 (optional), Modbus TCP/IP

Network connection

2

LAN version

: Two Ethernet connectors (10/100 Mbps), switch function, M12 female D-

coding connector; 

Cellular version

 (optional): SIM card (3G/4G); 

WiFi version

(optional)

USB port

Used for data download and software upload. The controller records approximately
20,000 data points for each connected sensor.

Compliance information CE. ETL certified to UL and CSA safety standards (with all sensor types).

Warranty

1 year (EU: 2 years)

General information

In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential
damages resulting from any defect or omission in this manual. The manufacturer reserves the right to
make changes in this manual and the products it describes at any time, without notice or obligation.
Revised editions are found on the manufacturer’s website.

1

Refer to the module documentation for additional information.

Note: Connect only one module to one of the available slots.

2

The type of connection is dependent on controller configuration.

English

3