Option
Description
Program
Select the program number from 1 to 9. Default volumes: 0.2, 0.4, 0.5, 1.0, 1.3, 2.0, 2.3, 2.5,
5.0 mL
Options
Calibrate
: Calibration mode. Select between:
• Two points: two points calibration.
• One point: one point calibration.
• Counter: Displays number of pipettings since last calibration.
Service
: The piston can be disconnected and reconnected in Service mode. Refer to
on page 14.
Name
: This function enables user to set a name for the pipette. The name is always shown on the
display when the pipette is in sleep mode. To change the default name:
1.
Choose
Name
from the menu and select
Edit
. The first digit starts to flash.
2.
Change the digit with the scroll key. Move to the next digit with
OK
. When the last digit is
accepted the name is changed.
Power
: With this function the power can be turned off. Pressing any key turns on the power.
Buzzer
: The buzzer can be turned on and off with this function.
Version
: The software version is displayed.
Backlight
: Turn on/off the backlight.
Figure 2 Pipette operation
1
Speed indicator
4
Function
7
Scroll Key
2
Battery indicator
5
Speed-in/-out
8
Tip Ejector Lever
3
Volume indicator
6
Right Selection Key
9
Left Selection Key
Operation
W A R N I N G
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the personal protective
equipment appropriate to the chemicals that are handled. Refer to the current safety data sheets
(MSDS/SDS) for safety protocols.
C A U T I O N
Chemical exposure hazard. Dispose of chemicals and wastes in accordance with local, regional and
national regulations.
English
7
Summary of Contents for TenSette plus
Page 2: ...English 3 Deutsch 17 Fran ais 33 Nederlands 49 2...
Page 65: ......
