Hach TitraLab, User Manual

7

Section 2

General information

2.1

Safety information

Please read the entire user manual carefully before the equipment is unpacked, set up or 
put into operation. Pay attention to all danger and warning statements. Failure to do so 
could result in serious injury to the operator or damage to the equipment. 

To make sure that the protection provided by this instrument is not impaired, do not use or 
install this instrument in any manner other than that specified in these operating 
instructions.

Note: 

Information that supplements points in the main text.

2.1.1

Warning labels

Read all labels and tags attached to the instrument. Failure to do so may result in personal 
injury or damage to the instrument. For symbols applied to the instrument, corresponding 
warnings are provided in the user manual. 

D A N G E R

Indicates a potentially or imminently hazardous situation that, if not avoided, results in death or 
serious injury.

WA R N I N G

Indicates a potentially or imminently hazardous situation that, if not avoided, could result in death 
or serious injury.

C A U T I O N

Indicates a potentially hazardous situation that may result in minor or moderate injury.

N O T I C E

Indicates a situation that, if not avoided, could result in damage to the instrument. Information that 
requires special emphasis. 

This symbol, if noted on the instrument, references the instruction manual for operation and/or safety 
information.

This symbol may be found on an enclosure or barrier within the product and indicates a risk of electrical shock 
and/or death by electrocution.

Electrical equipment marked with this symbol may not be disposed of in European domestic or public disposal 
systems after 12 August 2005. In conformity with European local and national regulations, European electrical 
equipment users must now return old or end-of life equipment to the manufacturer for disposal at no charge to 
the user.

Note: 

For return for recycling, please contact the equipment manufacturer or supplier for instructions on how to 

return end-of-life equipment, manufacturer-supplied electrical accessories, and all auxiliary items for proper 
disposal.