Safety
Seite 27 von 38
QSL-T/QST-150-25/45 V3
Standard
Original operating manual
Rev1.1
WARNING
Injuries
Due to unsuitable attachments
By attaching unbalanced components and / or sharp / dangerous components the motor
can be damaged when in operation and can become a source of danger for injuries
Only balanced attachments that do not have any sharp edges or dangerous geometries
may be used. Additional parts may only be attached via the drive shaft.
WARNING
Injuries
due to parts thrown out of the motor.
Before commissioning, the motor must be checked for foreign objects that could have got
into the motor during transport or assembly.
WARNING
Injuries
Breakage of the motor during operation
The load limits defined in the "Technical specifications" chapter must not be exceeded
under any circumstances.
DANGER
Interruption of power supply
The motor may only be used in applications in which no dangerous situation can arise if the
power supply is interrupted.
WARNING
Hearing damage
Operation under load or in certain speed ranges can cause hearing-damaging noise.
The operator must ensure that there is no harmful noise exposure and, if necessary,
provide the appropriate protective equipment.