5.52.270.00.01.04
7
4.2
Design
HADEF wirerope hoists are suitable for mobile use.
The housing is made of aluminium.
Basic model:
wirerope hoist Type 147/05
with lever tube
including 20 m wirerope with hook and tapered
end
Illustration 1
4.3
Functions
Durch
By moving the lever, the wire rope is moved forwards or backwards through the clamping jaws.
This makes it possible to move the load forwards or backwards.
In case of overload, a safety pin breaks and interrupts the pulling movement.
Reduce the load to the max. nominal load and insert a new, original safety pin.
4.4
Important components
Housing
made of aluminium
Brake
Load pressure brake
Clamping jaws
Clamping jaws transport the wire rope.
Overload protection
The safety pin shears off in case of overload. Moving the load cannot be continued.
Wire rope
Only special wire ropes must be used that have been developed for these units.
5
Technical data
capacity
pulling
force
lever
force with
full load
wirerope
turn per
double lift
wirerope
Ø
1)
minimum
breaking
force
weight
without
rope
wirerope
weight
per m
kg
kg
N
mm
mm
kN
kg
kg
800
1200
341
52
8,3
40
6,4
0,25
1600
2400
400
55
11
80
12
0,51
3200
4000
438
28
16
160
23
1
5400
8100
850
25
20
270
61
1,65
1) special wire rope
6
Installation
Please observe the following points in order to avoid damage to the equipment or injury of person:
Wear protective gloves
Check assembly devices for stable hold.
The device must be set up and attached in such a way that it cannot change position neither by the load
nor by other influences.
