8
5.52.270.00.01.04
6.1
Wire rope assembly - free running mechanism
The free running mechanism of wire rope offers
easy feed in and out of the uncharged wire rope
during assembly and disassembly of the wire
rope.
Basic position of the operation levers
Illustration 2
Insert the wire rope
Move lever (A) slightly to the left side.
Nearly simultaneously move lever (B) and (C)
until lever (C) engages.
The maximum position for lever (A) is the
vertical position, not further.
Insert the wire rope into the unit from the back.
Feed the wire rope completely through the unit
until it comes out in the front of the unit.
Unlock lever (C) to the right side.
Illustration 3
correct wrong
Illustration 4
CAUTION!
It is prohibited to insert the wire rope into the unit from the front.
Never use the free-running mechanism when the wire rope is charged!
Remove the wire rope
Disassemble the wire rope in the same way as the
assembly is done.
Move lever (A) slightly to the left side.
Nearly simultaneously move lever (B) and (C)
until lever (C) engages.
The maximum position for lever (A) is the
vertical position, not further.
Pull the wire rope out of the unit to the back
side.
Unlock lever (C) to the right side.
Illustration 5
