5.52.190A.01.01.04
17
WARNING!
When the dimensions listed in the table are reached due to wear or deformation, the chain must be
replaced!
DANGER!
In case of corrosion and/or wear of the surface coating, the chains must be exchanged by original
chains.
12.3
Checking the load hook
Load hook
X = measuring distance hook mouth width
Y = measured length from hook no. 6
H = thickness of hook saddle
Illustration 8
Dimension
mm
Capacity/chain falls
5000 kg
10000 kg
15000 kg
20000 kg
25000 kg
30000 kg
40000 kg
50000 kg
X or Y
45/-
56/-
-/130
-/145
-/160
-/180
-/200
-/225
H
48
67
85
95
106
118
132
150
Dimensions in the tables are theoretical values without tolerances.
Please fill in the measured
values before putting into
operation:
Capacity
kg
X or Y
mm
H
mm
CAUTION!
When the dimension of hook opening width is deformed more than 10% or when the dimension of the hook
bottom thickness is fallen short of by 5% due to wear, the hook must be replaced.
DANGER!
In case of corrosion and/or wear of the surface coating, the hooks must be exchanged by original
hooks or the coating must be renewed.
12.4
Check of the pawl
A
Vmin
kg
mm
mm
5000-50000
35
33,25
12.5
Check of the brake system
Ratchet wheel (A) and brake linings (B)
D
Vmin
tn
tv min
A 2xB
kg
mm
mm
mm
mm
5000/1 - 50000/10
131
129
3
2,5
