background image

 

 

 Commissioning 

 

16 

  

5.52.187.00.01.02

 

8 Commissioning 

Pos: 13.2.1.1 /9--INBETRIEBNAHME/Allgemein/Allgemein/01.Allgemein @ 0\mod_1172504961658_52.doc @ 355 @  @ 1 

 

8.1 General 

Should the unit be used in Germany, please observe the accident prevention regulations, in particular BGV 
D8, BGV D 6 and BGR 500 (VBG 9a). 
For other countries: Inspections as above. Please observe the national rules and regulations and the 
instructions in this manual! 

 

Pos: 13.2.1.2 /---ALLGEMEIN/Hinweise/Prüfungen/HINWEIS - Prüfung durch befähigte Pesonen @ 0\mod_1177339966681_52.doc @ 5319 @  @ 1 

 

NOTE!

 

Hoists up to 1000 kg capacity and without motor-driven trolleys of hoisting unit must be tested by a “qualified 
person” before putting into operation for the first time. 
Hoists of 1000 kg capacity and up or with more than one motor-driven hoist movement; i.e. lifting and trolley 
movement, must be tested by a “licensed quality person” before putting in operation. 
An exception is “hoists ready for operation” acc. To BGV D6 II§25(4) with EU-declaration of conformity. 

Definition “qualified person” (former expert) 

A “qualified person” has learned, due to occupational training and experience and the job that the person has 
done, the skills needed to tests the material for one’s work. 

Definition “licensed qualified person” (former approved expert) 

A “licensed qualified person” has, due through special occupational training, knowledge about testing of the 
material for one’s work and knows the national accident prevention regulations and other prescriptions and 
technical regulations. This person must test the material for one’s work regularly with regard to design and 
kind of use. The license will be given to qualified person be the approved supervision authorities (ZÜS). 

Pos: 13.2.2.1 /9--INBETRIEBNAHME/Allgemein/Lastkette/06.Lastkette @ 0\mod_1178195068515_52.doc @ 5681 @  @ 1 

 

8.2 Load 

chain 

ƒ

  Before commissioning the load chain must be aligned and oiled. 

 

Pos: 13.2.2.2 /---ALLGEMEIN/Hinweise/Ketten/VORSICHT - Ketten:  Kein Fett, ohne Schmierung keine Haftung @ 0\mod_1177481784104_52.doc @ 5349 @  @ 1 

 

   

CAUTION!

 

Do not use grease for lubrication of load chain. 
Without lubrication, manufacturer's warranty and/or liability will be void. 
 

Pos: 13.2.2.3 /---ALLGEMEIN/Hinweise/Ketten/HINWEIS - Kettenlebensdauererhöhung durch Schmierung @ 0\mod_1177481941192_52.doc @ 5355 @  @ 1 

 

NOTE!

 

Continuous, thorough lubrication will increase the life of the chain considerably. 
 

Pos: 14.1 /10-SICHERHEITSPRÜFUNG/*Ü1*/#. Kapitel - Sicherheitsprüfung @ 0\mod_1172647514342_52.doc @ 401 @  @ 1 

 

Summary of Contents for 53/07




























Reviews: