12
Before Use
Please read through the instructions
carefully before using the unit and
carefully note the safety advice.
Always keep this manual accessible
to any users of the drill.
Area of Application
This device should only be used by
people who have completed a foot
care qualification. Before use the
operator should familiarize with the
device by reading this manual or
being instructed by another.
The device must only be used in
closed spaces. It may be used in
hospitals,
in
a
commercial
environment or in
patient’s
homes.
The device is not intended for use
in operating rooms.
The control unit can be set up in a
cabinet or can be used as a
portable unit, e.g. in a carry case. It
is suitable for the following scopes:
•
foot care (milling, trimming and
polishing),
•
manicure (grinding, milling and
polishing works).
The devise is determined of
operating
rotating
instruments, which will not
penetrate the skin or murcous
membrane
if
used
appropriate, but could evoke
damages accidently.
Caution: In the area of
pedicure you have to work
with spray techniques.
Operation
The working area must conform to
the conditions described. Set up the
unit in such a way, that the air slits
are not blocked and the extracted
air can escape well. To guarantee
unhindered air flow there must a
gap of at least 12 cm to the back-
side of the device.
Position the device so that the
operating buttons are easy to reach
and the outlet of the hose is a
maximum distance of 60 cm from
the patie
nt’
s foot. The unit should
be placed 30
–
90 cm above the
floor.
Image: Example of positioning of foot care unit
in treatment room
