Megapixel IP Camera User manual V2.0.0
14
Figure 2.6 click AP, automatically fill information
The interface of WIFI Config as figure 2.7, when use the function of AP search,
double-clicking can auto add the configuration of WIFI parameter, but if the AP you
added enable encrypt, you need enter the right password.
You can also manually enter the information to add AP. First enable WIFI function.
Values of ESSID, MAC mode, region, bit rate and encryption-related information
please according to the setting of wireless router.
Figure 2.7 the interface of WIFI configuration
When device connects with WIFI and without wired network, you can access it by
wireless IP address. Manual set or use DHCP function can get wireless IP address.
When enable DHCP, the wireless router must enable DHCP too, otherwise the device
can’t get IP address.
Megapixel IP Camera User manual V2.0.0
15
Figure 2.8 the configuration of WIFI network
To avoid device drops in the case of abnormal, we can enable the function of ping
watch dog. Right fill ping IP address, ping time interval, ping maximum timeout and
save, then during the operation of the device, it will every time interval ping IP
address once, if request timed out, the timer add one, otherwise, set to 0. If the value
of timer bigger than maximum timeout, device will reboot automatic.
Figure 2.9 ping watch dog configuration
Notice:
Only when the device is properly connected with a WIFI module, you can see [WIFI
Setup].
2.4 ADSL Setup
ADSL setup is as figure 2.10.
The username and password of the ADSL are provided by network operators, enter
correct username and password, enable ADSL and save it. We can’t judge username
and password if right when save, but only right username and right password can dial
successfully.
Figure 2.10 ADSL Setup
2.5 DDNS Setup
DDNS setup is as figure 2.11.
First you must have a domain name.
www.3322.org
is recommended; please remember