Megapixel IP Camera User manual V2.0.0
12
address. The gateway and IP address must in the same network segment.
DNS server address is the host IP address running in the domain server, which
provide by network operators. When you don’t know how to set it, you can search in
the internet, or you can enter 8.8.8.8 which is common used in the world.
DHCP is a network protocol in local area network. Enable DHCP function device can
obtain IP address automatically in local area network. But achieve this function must
ensure your router enables DHCP function also.
Figure 2.2 Ethernet setup
2.3 WIFI Setup
WIFI setup as figure 2.3, First you need to set wireless router called AP for short.
Figure 2.3 WIFI setup
When set the WIFI network parameter of wireless router, such as TP-LINK (the type
is TL-WR941N), first enter setup interface, enable wireless function and SSID
broadcast, custom the SSID which is the name of this WIFI, choose wireless channel.
WIFI mode usually choose 11n only or 11bgn mixed, also you can set by yourself;
Megapixel IP Camera User manual V2.0.0
13
Fill other parameters according to the actual situation.
The encryption of WIFI is to ensure security. Different router has different encryption
methods. Please according to your own needs and the system prompt messages to set
it.
After configured wireless router, we can start configure the WIFI parameter of device.
Enter the interface of [WIFI Setup], there are four function areas: AP search, WIFI
config, WIFI network and ping watch dog.
The interface of AP search as figure 2.4, click the button of “search”, device will
auto-search available WIFI access point in local network and show in the list, as
figure 2.5. This list detailed shows SSID, quality, encrypt type, level and other
information of each AP, user could make a choice through those parameters. Double
click will automatically fill AP information into WIFI configuration list.
Figure 2.4 AP search interface
Figure 2.5 AP information list
