English
Instructions for use
3
Before the first use
•
Take the appliance and accessories out the box. Remove the stickers,
protective foil or plastic from the device.
•
Place the device on a flat stable surface and ensure a minimum of 10 cm.
free space around the device. This device is not suitable for installation in a
cabinet or for outside use.
•
Before using your appliance for the first time, wipe off all removable parts
with a damp cloth. Never use abrasive products.
Operation
This appliance has push-button operation. The motor will run as long as you
keep the switch pressed down.
IMPORTANT:
•
The appliance is suited for a short-term operation of maximum 30 seconds.
Allow it to cool down for approx. 2 minutes before using it again.
•
After 5 operating cycles, allow the appliance to cool down for approx. 15-20
minutes.
•
Do not start-up if there is nothing in the chopper. Avoid the blades rub with the
glass bowl.
1.
Place the non-slip mat on a level, flat surface. Place the bowl into the non-
slip mat.
2.
Fit the blade onto the axis of bowl and place the ingredients to be
chopped in the bowl.
The chopper is equipped with a double blade. You can fit the extra blade
over the axle of the first blade with long shaft align the slot and tabs on
both blades and turn to lock.
3.
Place the lid onto the bowl and over the axle of the knives.
4.
Fit the power unit. The power unit will only fit correctly in two positions.
5.
Plug in. press down on the power unit for short lengths of time to produce a
pulsing action-this will avoid over processing the ingredients.
6.
If the appliance is overloaded, remove some of the mixture and continue
processing in several batches.
7.
Do not run the chopper continuously for longer than 30 seconds. Leave to
cool for 2 minute in between each 30 seconds operation.
8.
After use unplug and dismantle.
