English
Instructions for use
3
Before First Use
•
This appliance is designed to brew drip coffee by the effect of hot water
passing through ground coffee.
•
Completely remove all the transport and packaging items inside or outside
the appliance.
•
Clean the jar and filter housing and permanent filter.
•
Put the appliance on a flat and stable surface.
•
Put the plug in an earthed wall socket.
•
Open the lid.
•
Fill the water tank with fresh, cold water to the MAX indication and put the
jug in place.
•
Do not put a filter with ground coffee in the filter basket.
•
Switch the appliance on by pressing the on/off switch. The light goes on.
•
Let the appliance run until the water tank is completely empty.
•
Switch the appliance off when all the water is in the jar.
•
Let the appliance cool down for at least 4 minutes before you start brewing
coffee.
Using your coffee maker
1.
To prepare Coffee or Tea: Take a standard 1X4 Paper filter and put into the
filter basket then add necessary amount of ground coffee (approx. 7g per
cup) or Tea. Insert the filter assembly into position. Fill up the water tank with
required quantity of fresh and cold water, close the lid and place the jug on
the hotplate. Turn on the switch, the indicator light up, the appliance start
working.
2.
Anti-drip function: The drip stop system prevents coffee from dripping
through the filter onto the hotplate when you remove the jug from the
appliance during or after brewing. To prevent overflow from filter, never take
the jug away over 20 second. If needed, turn off the appliance after take off
the jug.
3.
Auto Keep Warm: After the brewing completed, the Keep warm function will
start automatically if the appliance still in ‘ON’ position.
4.
Temperature Control device: When the appliance is in ‘ON’ position without
water or after finished brewing water, the temperature will increase and the
temperature control device will cut off the power automatically at the
required temperature.
Summary of Contents for CM-550.002A
Page 23: ......
