English
7
8.2 Transmitting
(sending)
a.
Press and hold the PTT (Push to Talk) button to
transmit your voice. The transmit signal icon “TX”
will display on the LCD screen.
b.
Hold the unit in a vertical position with the Mic
(Microphone) 5 cm away from the mouth. While
holding the PTT button, speak into the
microphone in a normal tone of voice.
c.
Release the PTT button when you have finished
transmitting.
Important:
•
In order for other people to receive your transmission, they
must also be on the same channel that you are currently
using. Refer to the "Changing Channel" section for more
information.
•
When the PTT and/or CALL buttons are continuously
pressed, your PMR cannot receive any transmissions.
8.3
Receiving a Call
The unit is continuously in receiving mode when it is
turned ON and not transmitting. When a signal is
received on the current channel, the receive signal
icon “RX” will be displayed on the LCD screen.
8.4
Adjusting the Speaker volume
There are 8 volume levels; the current speaker
volume level is displayed on the LCD screen.
To adjust the speaker volume level, press the
▲
(UP)
button to increase, or press the
▼
(DOWN) button to
decrease.
