English
5
7.3
Removing Installing the Belt Clip
1. To remove the clip from the
unit, push the belt clip
towards the antenna, while
pulling the clip tab as shown
in Fig.1.
2.
When re-installing the belt
clip, a click indicates the Belt
Clip is locked into position.
7.4 Battery
Installation
1. Remove the belt clip.
2. Press the battery cover and slide it down.
3. Insert 3x ‘AAA’ alkaline batteries following the batteries’ polarity
marked on battery compartment. See Fig 3.
4.
Replace the Battery
Cover and Belt Clip.