DISPLAYS AND BUTTONS
CHRONOGRAPH
SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown clockwise to set hour and minute hands.
3. After the time has been set, push the crown back to
the Normal position.
SETTING THE DATE
1. Pull the crown out to the 1nd Click Position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM and
1:00 AM, the date may not change on the following day.
3. After the date has been set, push the crown back to
the Normal position.
CHRONOGRAPH RESET (AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph
second hand does not return to the Zero position.
1. Pull the crown out to the 2nd position.
2. Press button „A“ (forward) or „B“ (backward) to set the
chronograph second hand to the zero position.
The chronograph hand can be advanced rapidly by
continuously pressing button „A“ or „B“.
3. Once the hand have been zeroed, return the crown to
the normal position.
* Do not push crown to normal position while the
chronograph second hand returns to zero position.
MEASURING TIME WITH THE
CHRONOGRAPH
This chronograph is able to measure and display time in
1 second steps to maximum of 30 minutes.
The chronograph keeps continuously for 30 minutes after starting,
and then stops at Zero position.
USING THE CHRONOGRAPH
1. Press button „A“ to start the chronograph.
2. The chronograph can be started and stopped each time
button „A“ is pressed.
3. Press button „B“ to reset the chronograph and chronograph
minute and second hands return to their zero positions.
„A“
Time measurement
„A“
Stop
„B“
RESET
BUTTON
A
BUTTON
B
CROWN
NORMAL-POSITION
1st CLICK POS.
2st CLICK POS.
DAT E
C H R O N O S E CO N D H A N D
C H R O N O M I N U T E H A N D
2 4 H O U R H A N D
T I M E S E CO N D H A N D
