ESPRIT Gas Extinguishing User Manual
INSTALLATION
19
Approved Document Ref: UI-ESG-01 Issue 2.0
Mains Connections
Note:
All connection must be carried out in accordance to local requirements and regulations.
Connecting the Batteries
Note:
In the event of mains failure, the battery charger circuit will protect the batteries from full
discharge by disconnecting them when they reach below 19v. When the mains supply is restored the
batteries will be automatically reconnected.
Note:
If the mains are connected before the batteries, the panel will show a Power Supply fault for up
to 1 minute until the monitoring cycle has finished polling. This is normal. If the fault doesn’t clear after
1 minute, check connections.
Connect the red lead to the positive (+) terminal of battery No.1 and the black lead to the negative (-)
terminal of battery No.2. Connect the negative terminal of battery No.1 to the positive terminal of
battery No.2, using the supplied link cable.
www.acornfiresecurity.com
www.acornfiresecurity.com
