ESPRIT Gas Extinguishing User Manual
CONFIGURING THE PANEL
68
Approved Document Ref: UI-ESG-01 Issue 2.0
CONTROL Menu
From the
Main Menu
, the
CONTROL
menu (Access level 3) option, and its sub-menus, is used to
configure the extinguishant’s release and extraction
:
•
CONTROL
o
EXTRACT
o
FLOODING
o
DELAYS
To access the
CONTROL
menu:
•
Turn
Activate Controls
key clockwise to
On
, or use the keypad to enter Authorised User
(Access level 2) code 1111:
o
Press
✓
key
o
Use Up/Down arrow keys to increase/decrease the number value
o
Use Left/Right arrow keys to move to the next digit in the 4-digit sequence
o
When all 4 digits have been set to the code 1111, press the
✓
key again
•
The
Main Menu
will become available for operation
•
On the
Main Menu
, use Left/Right arrow keys to move cursor to
CONTROL
menu icon
•
Press
✓
key to select
CONTROL
menu. The digital display will show the following message:
Enter Level 3 Access Code
•
Use the keypad to enter code 3333:
o
Press
✓
key
o
Use the Up/Down arrow keys to increase/decrease the number value
o
Use the Left/Right arrow keys to move to the next digit in the 4-digit sequence
o
When all 4 digits have been set to the code 3333 press
✓
key once again. The Access
level 3 menu will become available for operation.
Control Menu: EXTRACT
To configure the
EXTRACT
controls, access the
EXTRACT
menu:
•
From the
CONTROL Menu
, highlight
EXTRACT
option and then press the
✓
key in order to
gain access to it.
•
The information available under
EXTRACT
Menu will be presented as follows:
EXTRACT Menu
GAS AREA ONE / TWO / BOTH
START EXTRACT
STOP EXTRACT
•
Use Left/Right arrow keys to toggle between the Gas Area options (
One
,
Two
or
Both
)
•
Use the Up/Down arrow keys to navigate between them.
•
Press the
✓
key to select required option.
•
Press return
key to return to
CONTROL Menu
, further presses of return
key to return
to logo screen.
www.acornfiresecurity.com
www.acornfiresecurity.com
