ESPRIT Gas Extinguishing User Manual
CONFIGURING THE PANEL
83
Approved Document Ref: UI-ESG-01 Issue 2.0
ENG Menu
From the
ENG
menu option on the Main Menu, the following sub-menus can be accessed:
•
ENG
o
Test
▪
ON/OFF
▪
SETTINGS
o
MISC
The
ENG
menu is used to:
•
Test the system and set which Gas Area zones are to be included/excluded from the test
•
Remove all disablements, set during configuration.
To access the
ENG
menu:
•
Turn
Activate Controls
key clockwise to
On
or
•
Use the keypad to enter Authorised User (Access level 2) code 1111:
o
Press
✓
key
o
Use Up/Down arrow keys to increase/decrease the number value
o
Use Left/Right arrow keys to move to the next digit in the 4-digit sequence
o
When all 4 digits have been set to the code 1111, press the
✓
key again
•
The
Main Menu
will become available for operation
ENG Menu: TEST
Test MODE is used when testing the Fire Alarm system. In test mode the devices in the zone(s) in test
(detectors, call points, etc.), can be activated and the panel will automatically reset, enabling the system
to be tested by one person.
Under the Test MODE sub-menu, the following sub-menus are available to set the parameters for the
system test:
•
ON/OFF
•
SETTINGS
Test MODE Menu: ON/OFF
This is the main activation control for Test Mode, any zones that have been set for Test Mode will be
disabled (i.e. operate normally) unless overall Test Mode function has been set here.
To set the test mode required:
•
On the
Main Menu
, use Left/Right arrow keys to move cursor to
ENG
menu icon and press
✓
key to select.
•
From the
ENG Menu
, use Left/Right arrow keys to move curser to select
Test
sub-menu.
Press
✓
key to select.
•
From the
Test MODE
menu, use the Left/Right arrow keys to select the
ON/OFF
sub-menu
icon. Press
✓
key to select it.
•
On the
Test ON/OFF
sub-menu, using Left/Right arrow keys; move curser to either
ON
or
OFF
, as required. Press
✓
key to select.
Note:
ON
will activate Test Mode function, so that any zone set for this mode can be tested.
www.acornfiresecurity.com
www.acornfiresecurity.com