Hafco Metalmaster BS-321AS, Instruction Manual

Manager:

Metal Cutting Bandsaw

LOW

CRUSHING

Authorised and signed by:

Developed in Co-operation Between 

A.W

.I.S.A

 and 

Australia Chamber of Manufactures

This program is based upon the Safe W

ork 

Australia, Code of Practice  -  Managing Risks of Plant in the W

orkplace  ( WHSA

 201

1 No10 )

O

NEW

 MACHINER

Y

 HAZARD IDENTIFICA

TION, 

ASSESSMENT & CONTROL

If blade breaks do not open door until both wheels have stopped.

Safety of

ficer:

Remove all loose objects around moving parts.

Machine should be installed & checked by a Licensed Electrician.

PLANT SAFETY

 PROGRAM

No.

Hazard

Identification

Item

Hazard

Assessment

SHEARING

B

D

ENT

ANGLEMENT

CUTTING, ST

ABBING,

H

PUNCTURING

MEDIUM

Blade guards should always be in the closed position before starting machine.

A

C

HIGH

Risk Control Strategies

(Recommended for Purchase / Buyer / User)

Secure & support Long / heavy material

Eliminate, avoid loose clothing / Long hair etc.

W
ear gloves when changing blades.

Check blade tracking before starting.

Blade guide system should be adjusted to suit material width.

MEDIUM

W
ear safety glasses

Isolate power to machine prior to changing belts or maintenance.

Stand clear of machine when in operation.

MEDIUM

ELECTRICAL

F 

STRIKING

LOW

Support long heavy jobs and stand clear of of

fcuts.

OTHER HAZARDS, NOISE.

LOW

All electrical enclosures should only be opened with a tool that is not to be kept with the machine.

W
ear hearing protection as required.

Make sure all guards are secured shut when machine is on.

Revised Date:

www

.machineryhouse.com.au

www

.machineryhouse.co.nz

12th March 2012

Isolate main power switch before changing blade, cleaning or adjusting.

Plant Safety Program to be read in conjunction with manufactures instructions

4

Instruction Manual for BS-321AS (B034A)

31/03/2016